Accessories
Here you will find accessories needed to add or to complete the installation.
We have devided them into different groups in order to get a good overlook.
Brackets, wall pass-through, ventilation louvres.
This little tool could be very useful.
DWP Accessories wall pass-through
Accessories Wall pass-through
Airsoundproofing 59 – 62 dB.
DWP Accessories Brackets Combi-Connect 19
Brackets
For DWP Power track with Combi or Connect media duct
Bracket 19 mm is used for wall and ceiling installation. Distance between the brackets max. 1200 mm or at least 2 per track/duct. For wall installation the bracket is mounted with the lug facing down.
In case of double installation the brackets are mounted with the lugs facing each other. Spacers are available.
Track/duct are clipped into position. At ends and by vertical installation locking clamps must be used to fix the track/duct.
Locking clamps are pushed into the U-slot in the track. To unclip the track/duct use a screwdriver
Download dimensions (zip): www.kb-system.com/byggmatt
DWP Accessories Brackets Combi-Connect 35
Brackets
For DWP Power track with Combi or Connect media duct
Bracket 35 mm is used for wall installations. Distance between the brackets max. 1200 mm or at least 2 per track/duct.
Spacers are available. Track/duct are clipped into position.
Download dimensions (zip): www.kb-system.com/byggmatt
DWP Accessories Brackets Connect
Brackets
For DWP Power track with Connect media duct
Wall bracket 46, 71 och 96 mm can also be used for installation of the Power track (without duct).
Wall brackets with ventilation louvre U/F-shape are used as upper bracket with extension from the wall.
Dimensions are 46, 71 or 96 mm. The distance between the brackets must be max. 1200 mm or at least 2 per track/duct.
In case of double installation the downward extension bracket is used as a lower bracket. Spacers, 2 mm or 3 mm, are available.
Wall- and downward extension brackets are self-locking. Adjustable wall bracket only for horizontal installation.
DWP Accessories Brackets Combi
Brackets
For DWP Power track with Combi media duct
Wall bracket with ventilation louvre U/F-shape is used with extension from wall when installing the combination power track/DWP Combi. Dimensions are 54 or 94 mm.
The distance between brackets max. 1200 mm or at least 2/track. Spacers, 2 or 3 mm, are available.
Wallbrackets are self-locking. Adjustable wall bracket only for horizontal installation.
DWP Accessories Brackets Ceiling Installation
Brackets
For ceiling installation
Joint support for installation in ceiling is used with screw, pendelum or wire and must be centrated over each joint of the power track.
Bracket for ceiling must be used in every end of a power track and where an additional fixing point is necessary. Max. length between
brackets is 1200 mm. The brackets are clipped on the power tracks/cable ducts and locked with the locking screw.
Max weight between two fixing points are 15 kg.
Art no 4399 and 9655 have press nut M10 for threaded bar and are used by pendelum installatiton and by installation together with cable basket.
DWP Accessories Ventilation Louvres
Ventilation louvres with accessories
Ventilation louvre F-shape and U-shape can be combined as optional. 1 pc F-shape can replace 2 pcs U-shape.
Dimensions of the bracket are 125 – 190 mm or 190 – 290 mm when installing the power track with or without cable duct DWP Combi.
Dimensions are 135-200 mm or 200-300 mm when installing power track with Connect. The louvres are clipped into position.
Louvre support for adjustable bracket must be ordered separately.
Down load dimensions (zip) www.kb-system.com/byggmått
